TIMKEN 07100-90094 Tapered Roller Bearing Assemblies

Grease Speed Rating n1:6300 rpm; Sealed Speed Rating n3:6300 rpm; Basic Dynamic Radial Load Rating C:46800 N; Basic Static Radial Load Rating Co:43000 N; Accessories:One Shield; B:33.30 mm; Oil Speed Rating n2:8500 rpm; d:30.000 mm; D:72.0000 mm; Fillet Radius ra:1.00 mm;

l7 min.:24 mm; d2 max.:54 mm; G:M 20x1.5; Mass rod end:0.32 kg; C1 max.:13.5 mm; B:16 mm; l2 max.:107 mm; α:9 °; h:78 mm; d:20 mm;

B:15.342 mm; B4:16.916 mm; d1:68.263 mm; Sleeve:S 116x2.11/16; Threads per inch:12; G:79.68 mm; Mass adapter sleeve assembly:1.45 kg; d3 max.:105.689 mm; Lock nut:AN 16; Hydraulic nut:HMVC 16E;

Hydraulic nut:HMVC 18E; Mass adapter sleeve assembly:1.8 kg; d:90 mm; d1:80.963 mm; Lock washer:W 18; B1:89.992 mm; Sleeve:S 118x3.3/16; Threads per inch:12; G:89.586 mm; Lock nut:AN 18;

Dynamic (Cr):9 mm; Pu:1400 kN; Grease:1970 kN; with tapered bore:1 200 min-1; rs (min):4 mm; B:120 mm; D:360 mm; Static (Cor):16.7 mm; d:170 mm; with cylindrical bore:940 min-1;

α:5 °; Basic static load rating C0:585 kN; h:270 mm; l7 min.:98 mm; Specific dynamic load factor K:300 N/mm²; Basic dynamic load rating C:1140 kN; B:55 mm; Mass rod end:12 kg; l1 min.:140 mm; dk:105 mm;

da:55.563 mm; P60°:50.3 kN; Ca:39.014 mm; Mass pillow block:10.5 kg; J max.:241.3 mm; h:30.163 mm; J min.:206.375 mm; L:279.4 mm; Da:120 mm; Max. speed for Taconite seal:1400 r/min;

D:110.0000 mm; Sealed Speed Rating n3:4300 rpm; Grease Speed Rating n1:3800 rpm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:88000 N; Basic Dynamic Radial Load Rating C:78100 N; B:38.10 mm; d:60.000 mm; Fillet Radius ra:1.50 mm; Accessories:Two Shields;

d:35.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6000 rpm; Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:37700 N; D:72.0000 mm; Sealed Speed Rating n3:6000 rpm; Oil Speed Rating n2:8000 rpm; B:27.00 mm; Basic Static Radial Load Rating Co:27500 N;

r1,2 min.:0.3 mm; Lw:17.8 mm; r1 max.:0.8 mm; Dw:3.5 mm; r2 max.:1 mm; Mass needle roller:1.34 g;

d3 max.:155.702 mm; d:120 mm; Sleeve:S 24x4.1/16; Lock washer:W 24; B1:87.782 mm; G:119.786 mm; Lock nut:AN 24; Threads per inch:12; B:20.904 mm; B4:23.825 mm;

B:33.00 mm; Basic Dynamic Radial Load Rating C:99500 N; Sealed Speed Rating n3:3400 rpm; d:55.000 mm; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:6000 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:62000

G:M 160x3; d1:173 mm; Recommended grub screw tightening torque:35 N·m; Grub (set) screw size:M10; Associated spanner:TMFN 30-40; h:7 mm; Mass lock nut:2.8 kg; B3:11 mm; B:32 mm; d3:210 mm;

D:180.0000 mm; Basic Static Radial Load Rating Co:80000 N; Fillet Radius ra:2.00 mm; Accessories:Shield & Seal; B:28.00 mm; Sealed Speed Rating n3:2200 rpm; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:85200 N; Oil Speed Rating Open/Shielded n2:4000

Fatigue load limit Pu:39 kN; Basic dynamic load rating C:331 kN; Reference speed:3800 r/min; da max.:106 mm; d3:120 mm; db min.:96 mm; r1,2 min.:2 mm; Limiting speed:5300 r/min; Calculation factor Y0:2.8; b:6 mm;